Feed mixer H006
Working capacities 400 / 600 / 800 / 1200 l · Max. PTO shaft 540 rpm · three-point linkage · Rear discharge and side
Feed mixer H006 for mixing dry feed components on livestock farms.
400–1200 l
PTO shaft max. 540 rpm
three-point linkage
5 options
For whom
Proprietary Mixes
The suspended mixer JAR-MET from the H006 is used to prepare bulk feeds from grain components, concentrates, meals, dried grains, and vitamin supplements. Working capacities available: 400 / 600 / 800 / 1200 l. The machine is powered by the tractor's PTO shaft via a telescopic shaft, with working speeds up to 540 rpm; a hydraulic motor is optional. You can select the configuration in main configurator.
400–1200 l.
Working capacities: 400, 600, 800 and 1200 l.
PTO shaft max. 540 rpm.
The manufacturer recommends approximately 400 rpm during loading and 450–500 rpm during mixing.
Upper mesh cover.
Feeding is done through the mesh cover; the tank is filled to a maximum of ¾ of its height.
Architecture
Design and equipment
Detailed product specifications will appear here after the page loads.
Interactive
See the mixer's construction H006
Click on the points on the machine to see the most important design elements.
Point 1 / 4
Upper Sieve
This sieve (code 8261-04-01) screens out larger fractions when loading components. It prevents the mixer from becoming clogged with impurities. It's a fixed part of the structure—no moving parts.
Configurations
Select mixer configuration H006
Three pre-made variants - click on the points on the machine to see the equipment. Each is available in four load capacities: 400, 600, 800, and 1200 kg.
Standard Drive
Standard — PTO shaft Drive
Basic configuration driven by the tractor's PTO shaft. The simplest and cheapest to operate.
Equipment
Upper Sieve
The sieve (code 8261-04-01) screens out larger fractions during component loading and protects the mixer.
8261-04-01Fixed part
400–1200 kgLoad capacity350–760 kgweight22–80 kWPower
Drive Option
With Hydraulic Motor
Hydraulic drive instead of PTO shaft, controlled from the tractor cab - for municipal tractors and smaller tractors without PTO shaft.
Equipment
Hydraulic Motor
Hydraulic motor powered by the tractor's hydraulics and controlled from the cab - drive instead of a PTO shaft, for municipal tractors and those without a PTO shaft.
powered by the tractorcontrolled from the cab
400–1200 kgLoad capacity350–760 kgweighthydraulic motorDrive
New in the offer
With self-loading bucket
Hydraulic bucket mounted to the frame - loading feed components without a separate front loader.
Equipment
Hydraulic Bucket
The bucket is mounted to the mixer frame, opened hydraulically, and controlled from the tractor cab.
hydraulicsto the frame
400–1200 kgLoad capacity−30-50%Loading timefrom the cabOperation
Technology
Key Technologies
Feeding → Mixing → Discharge → Close and stop
Feeding and discharging take place with the mixer rotating. After unloading, close the slide gate, lower the mixer, and only then turn off the PTO shaft and tractor engine.
- Upper mesh cover with sieve
- Tank and four-arm agitator
- PTO shaft and gearbox
- Slide gate and discharge channel
- Support frame with three-point linkage hitches
Four-zone feed mixer H006
From safe feeding through the mixing chamber to two discharge directions – learn about the components that make up the complete machine.
Upper mesh cover for hopper
A rigid grate remains between the operator and the operating mixer. Material is poured through the cover without opening access to the interior of the tank.
1Fixed top cover
400–1200 lFamily capacity range
Cylindrical chamber with agitator
Inside the steel tank, a four-arm agitator operates, moving the ingredients and balancing the mixture. Power is supplied to the agitator via a gearbox.
4Mixing arms
4Capacity options
One of two standard discharges
The visible channel directs the finished mix beyond the tank's outline. The machine has rear and side discharges as standard, with hydraulic opening as a separate option.
2Standard discharges
1Hydraulic opening option
Lower support frame and three-point linkage pins
The frame under the tank transfers the mixer's weight to the three-point linkage. The basic set includes two lower pins and one upper pin.
3Linkage pins
H006Construction family
Upper mesh cover for hopper
A rigid grate remains between the operator and the operating mixer. Material is poured through the cover without opening access to the interior of the tank.
Cylindrical chamber with agitator
Inside the steel tank, a four-arm agitator operates, moving the ingredients and balancing the mixture. Power is supplied to the agitator via a gearbox.
One of two standard discharges
The visible channel directs the finished mix beyond the tank's outline. The machine has rear and side discharges as standard, with hydraulic opening as a separate option.
Lower support frame and three-point linkage pins
The frame under the tank transfers the mixer's weight to the three-point linkage. The basic set includes two lower pins and one upper pin.
Equipment
Standard and optional mixer equipment
Category
Kategoria części – Feed mixer H006
Multimedia
Feed mixer H006 — photos
Galeria zdjęć – Feed mixer H006
Model comparison
Technical specifications
Full specifications of H006/3, H006/1, H006 and H006/2: load capacity, dimensions, tank capacity and diameter, weight, power, and common parameters shaft.
| Model | Working capacity (l) | Permissible load capacity (kg) | Dimensions L×W×H (mm) | Tank capacity (dm³) | Tank height (mm) | Tank diameter (mm) | Machine weight (kg) | Transport speed (km/h) | Tractor: class / power / Power | Shaft: Torque / Power / Length | PTO shaft / Splines | Overload clutch (Nm) | Symbol KTM | Notes |
|---|
Comparison
Model Comparison - Feed mixer H006
Select two or three models – parameters in one table, without scrolling through the entire offer.
Batch Calculator
Daily Mixing Plan - H006
Enter the daily requirement, planned batch weight, and mixing time set for the components used. The calculator does not convert litres to kilograms without knowing the feed density.
About the Manufacturer
Why JAR-MET?
Productivity Calculator
Daily Feed Mixing - H006
Select a model, enter your herd size, and feed ration. The calculator will estimate the daily requirement, number of batches, and total mixing time. Approximate values depend on the mix composition and component density.
Contact
Let's discuss mixer configuration.
Capacity and equipment options - our team will help you choose the perfect model for your farm.
PROSTO Z GOSPODARSTWA