Mounted field sprayers with hydraulically folding boom
24 variants 200–1200 l · boom 10–18 m · P-100 / UDOR
Family of mounted sprayers with hydraulic boom. The catalogue confirms the widths 10, 12, 15 and 18 m; hydraulic lifting and extending range must be confirmed for the selected configuration.
200–1200 l
boom 10–18 m
UDOR · ARAG
all variants
For whom
Boom hydraulics selected for the variant
The card covers 24 commercial variants with tanks 200–1200 l and beams 10–18 m. Parameters depending on the hydraulic equipment — weight, dimensions, and complete set of hoses — remain incomplete.
Triple system in one body.
Vetroresina Padana - main tank + rinsing + hand washing in one compact body. Low centre of gravity, reduced load on the three-point linkage, improved maneuverability on headlands.
Four capacities to choose from.
ZETA 70 / 100 / 140 / 170 — a diaphragm-piston pump selected according to the capacity and width of the boom. Quiet, resistant to work with liquid fertiliser solutions (RSM).
From manual fittings to ISOBUS.
Standard: Agroplast single heads. Options: 3-position Agroplast/ARAG, constant pressure valves, computers ARAG BRAVO 180/350/400 S, DELTA 70T, ISOBUS IBX100, sensor GPS, boom hydraulics from 15 m.
Working Technique
5 modelsJP 200–650
6–14 mseeding
540 rpmPTO shaft
2 leversadjustment
Hydraulic boom and fluid
This offer includes hydraulic lifting, lifting with extension, stabilization, locking, distributor, and electric control. However, it does not constitute a complete table of weights, dimensions, or pipes for the finished product.
Technology
Key Technologies
Hydraulic A/X-Beam
The arms move from a compact transport system to full working width. The diagram shows the sequence of movements and does not attribute automatic levelling or independent end functions to the machine.
- Tank in a compact frame
- Control valve with pressure gauge
- Pump under the tank
- Hydraulically folding arms
Boom stage1 / 4
Tank200–1200 l
Pump P-100beam 10–12 m
Pump ZETA 100beam 15 m
Pump ZETA 140beam 18 m
Hydraulics
Four Key Assemblies of a Mounted Sprayer
Click on a tank, valve, pump, or boom to see how they form a compact sprayer hydraulic system.
Tank in a compact frame
The main tank occupies the centre of the machine and is located near the rear three-point linkage. The hydraulic family includes capacities 200–1200 litres.
200–1200 lFamily capacities
three-point linkageAggregation method
Control valve with pressure gauge
The central block distributes the liquid to the boom sections, and the pressure gauge allows you to monitor the operating pressure when setting the spray pattern.
manual PLstandard
centraloperating location
Pump under the tank
The pump is mounted low in the frame and driven by the PTO shaft. The type depends on the beam: P-100 for 10–12 m, ZETA 100 for 15 m and ZETA 140 for 18 m.
P-100 / ZETAPump family
10–18 mBeam selection
Hydraulically folding arms
The truss arms fold and lift with cylinders. Hydraulic suspension with stabilization helps keep the beam level on uneven surfaces.
10–18 mWorking width
hydraulicallyfolding and lifting
Tank in a compact frame
The main tank occupies the centre of the machine and is located near the rear three-point linkage. The hydraulic family includes capacities 200–1200 litres.
Control valve with pressure gauge
The central block distributes the liquid to the boom sections, and the pressure gauge allows you to monitor the operating pressure when setting the spray pattern.
Pump under the tank
The pump is mounted low in the frame and driven by the PTO shaft. The type depends on the beam: P-100 for 10–12 m, ZETA 100 for 15 m and ZETA 140 for 18 m.
Hydraulically folding arms
The truss arms fold and lift with cylinders. Hydraulic suspension with stabilization helps keep the beam level on uneven surfaces.
Control ARAG
Choose control system
Eight products ARAG: BRAVO (5 variants), Delta 70T (2 variants) and IBX100 (with 3 mounting variants). Recommended: ISOBUS IBX100 — universal.
CANBUS · Standard
BRAVO 180 S
Smaller computer ARAG — Input for spray automation.
- Screen: monochrome + graphics
- Sections: 5 or 7
- Control: rate L/ha, speed, pressure
- Tractor-independent
- The cheapest choice ARAG
5 section7 section
What you get
- Computer BRAVO 180 S (cab)
- Section valve harness (5 or 7)
- Pressure and speed sensors
When: Entry into automation for smaller farms.
CANBUS + Hydraulics
BRAVO 180 S with hydraulics
BRAVO 180 + boom hydraulics control from the cab.
- Screen: monochrome + graphics
- Sections: 5 or 7
- Hydraulics: Boom folding/unfolding from the cab
- Auto: Dosage + sections + boom hydraulics
- Boom: Unfolds without leaving the tractor
5 section7 section
What you get
- Computer BRAVO 180 S + hydraulics module
- Valve harness + Hydraulics
- Boom hydraulic controller
When: Sprayer with hydraulic boom - full control from the cab.
CANBUS · Medium
BRAVO 350
Medium shelf ARAG — colour screen + faster operation.
- Screen: Colour LCD greater than 180
- Sections: 5 or 7
- Automatic sections: with greater precision than 180
- Tractor-independent
- Intermediate shelf
5 section7 section
What you get
- Computer BRAVO 350 (colour LCD)
- Section valve harness (5 or 7)
- Pressure sensors, flow, speed
When: medium-sized farm, more functions than 180.
CANBUS + Hydraulics
BRAVO 350 with hydraulics
BRAVO 350 + full hydraulic boom control.
- Screen: Colorful LCD
- Sections: 7
- Hydraulics: Boom + stabilization from the cab
- Automatic sections + hydraulics
- For larger booms (18–21 m)
7 section
What you get
- Computer BRAVO 350 + module Hydraulics
- Valve Harness + Hydraulic Boom Control
- Hydraulic Controller
When: 7-section sprayers with hydraulic boom for 21 m.
CANBUS · Flagship
BRAVO 400 S with GPS
Flagship CANBUS — 5,7″ TFT, GPS, SD card, anti-overlay.
- Screen: 5,7″ TFT, 65 000 colours
- GPS: integrated, antenna included
- Automatic sections: up to 13 with anti-overlay
- SD card: work reports + tracks
- Tractor-independent
5 section7 section
What you get
- BRAVO 400 S (5,7″ TFT) + antenna GPS
- Section valve harness + sensors
- SD report card
When: The best CANBUS, fully automatic without ISOBUS.
Terminal 7″ + GPS
Delta 70T with GPS
7″ touch terminal ARAG with GPS - without ISOBUS, standalone.
- Screen: 7″ touchscreen ARAG
- GPS: integrated
- Sections: 5 or 7
- Field guidance
- NIE requires ISOBUS in tractor
5 section7 section
What you get
- Delta 70T Terminal 7″ touch
- Antenna GPS
- Valve harness + sensors
When: Modern screen 7″ without ISOBUS in the tractor.
Terminal 7″ + ISOBUS
Delta 70T ISOBUS
7″ touch terminal with full ISOBUS (UT/TC-SC/TC-GEO/NAV).
- Screen: 7″ touchscreen ARAG
- Features VT: UT + TC-SC + TC-GEO + NAV
- Variable Rate Application (VRA)
- Task Controller: ISO-XML, reports
- Full standard ISOBUS 11783
5 section7 section
What you get
- Delta 70T Terminal 7″ touch (ISOBUS UT)
- Harness ISOBUS
- Full integration with the tractor ISOBUS
When: Modern tractor with ISOBUS, reports ISO-XML.
ISOBUS · ECU
ISOBUS IBX100
Unit ECU ARAG — 3 mounting options (with or without Delta).
- Standard: ISO 11783 (universal ISOBUS)
- Valves: for 13 sectional or 128 Seletron
- 3 mounting variants — Variant 1/2/3 (see decision tree)
- Terminal: Delta 70T LUB tractor terminal
- Most popular ISOBUS
5 section7 section
3 mounting options (from PDF training ARAG)
- Variant 1: Tractor MA socket ISOBUS + Delta 70T (ISOBUS-compliant)
- Variant 2: Tractor MA own terminal VT (Delta NIE used)
- Variant 3: Tractor NIE has ISOBUS — Delta 70T stand-alone (NON-ISOBUS)
When: Full control ARAG regardless of the tractor. The decision tree will help you choose the right option.
Mounting option
Which option fits your tractor?
Only for the set IBX100 + Delta 70TAnswer the questions - we'll show you the optimal option.
Question 1 with 2
Does your tractor have a ISOBUS socket (usually at the rear)?
Question 2 from 2
Do you want the Delta 70T to be your main terminal?
Variant 1 · Most common
Delta 70T as the main terminal ISOBUS
The tractor has a socket ISOBUS — you connect through it, but this Delta 70T in-cab is the main operating screen for the mounted sprayer.
📋 Shopping List for Variant 1 (5 section):
| Terminal VT Delta 70T | 4675202 |
| IBX100 ISOBUS control unit | 4679004 |
| Monitor Adapter - UCS (Delta ↔ UCS) | 4679002.208 |
| Power Harness + ISOBUS + Monitor | 4679002.251 |
| Cable UCS Tractor ↔ IBX100 (10 m) | 4679002.501A |
| Sensor harness + main valve + adjustment | 4679000.110 |
| Hydraulic Harness (7 functions) | 4679000.191B |
| Section valve harness (5) | 4679000.195 |
🔧 Cable alternatives UCS: 3m=.503A · 6m=.505A · 14m=.504A · 18m=.500A · 9 hydraulic functions=.192B
Variant 2 · Minimum
Factory tractor terminal (Delta NIE used)
The tractor has its own terminal ISOBUS VT. The sprayer is displayed on the tractor monitor. The smallest kit - without an additional screen in the cab.
📋 Shopping list for Variant 2 (5 section):
| IBX100 ISOBUS control unit | 4679004 |
| Cable UCS Tractor ↔ IBX100 (10 m) | 4679002.501A |
| Sensor harness + main valve + adjustment | 4679000.110 |
| Hydraulic Harness (7 functions) | 4679000.191B |
| Section valve harness (5) | 4679000.195 |
❌ NIE you need: Delta 70T, adapter 4679002.208, harness 4679002.251 - you are using the factory terminal.
⚠️ If the tractor has multiple terminals VT — make sure only one is active.
Variant 3 · Stand-alone
Delta 70T as a stand-alone (no ISOBUS in the tractor)
Your tractor does not have a socket ISOBUS or it doesn't work. The Delta 70T works as a standalone unit — connected directly to the battery and mounted sprayer.
📋 Shopping list for Variant 3 (5 section):
| Terminal VT Delta 70T | 4675202 |
| IBX100 ISOBUS control unit | 4679004 |
| Monitor Adapter - UCS (Delta ↔ UCS) | 4679002.208 |
| Tractor harness NON-ISOBUS (stand-alone) | 4679002.400 |
| Cable UCS Tractor ↔ IBX100 (10 m) | 4679002.501A |
| Sensor harness + main valve + adjustment | 4679000.110 |
| Hydraulic Harness (7 functions) | 4679000.191B |
| Section valve harness (5) | 4679000.195 |
🔄 Difference vs. Variant 1: harness NON-ISOBUS 4679002.400 instead of 4679002.251 — powered by the tractor battery without a socket ISOBUS.
Equipment
Standard and optional sprayer equipment
Category
Kategoria części – Mounted field sprayers with hydraulically folding boom
Multimedia
Mounted sprayer with hydraulic boom
Galeria zdjęć – Mounted field sprayers with hydraulically folding boom
Model comparison
Technical specifications
| Variant | Symbol | Nominal Capacity | Working width | Boom hydraulic range | Pump | Nominal capacity | Pump capacity at 0 / max. pressure | Maximum operating pressure | Maximum tank capacity | Fill, indicator and scale | Liquid Residue | Diluent / Hand Washing | Liquid System | Filtration | Mountings and Sprayers | Power requirement | PTO shaft | Speed working | Confirmation Range |
|---|
Comparison
Comparison of selected models
Select two or three models – parameters in one table, without scrolling through the entire offer.
Spray Calculator
Plan Liquid Amount and Treatment Schedule
Calculations use the nominal capacity and working width of the variant. The range 4–8 km/h applies to base variants; calibrate before treatment.
RSM 32 + logistics
A realistic treatment plan, not just travel time
The module uses the variant selected in the calculator above and adds refills and travel to the refueling point.
RSM 32: solution mass = kg N ÷ 0,32; Volume = kg RSM ÷ 1,32 kg/l.
About the Manufacturer
Why JAR-MET?
Contact
Let's talk about sprayer configuration.
Hydraulic range, pump, and fittings must be confirmed for a specific variant before ordering.
PROSTO Z GOSPODARSTWA