Mounted field sprayers with manually foldable boom
Tank 200–1200 l · Boom 8–18 m · UDOR · ARAG
Italian tank Vetroresina Padana in a compact design, diaphragm pumps UDOR, heads Agroplast and ARAG, working booms from 8 to 18 m with optional control ISOBUS. Design optimised for a low centre of gravity and stable handling of the set on headlands. Select the variant and options at authorised dealer or at main configurator.
200–1200 l
boom 8–18 m
UDOR · ARAG
31 variants
For whom
Small and medium-sized fields
Capacity matched to the area — from 200 l to 1200 l tank in 7 variants. The manually extendable boom 8–18 m provides full control over the treatments without the boom's hydraulic system. Italian components (Vetroresina Padana, UDOR) and leading-edge field controllers (ARAG, ISOBUS) ensure dose repeatability and stability in irregular fields. 31 configuration variants —from a basic manual machine to a full ISOBUS with GPS configuration. Configuration is available in the master configurator or from an authorised dealer.
Triple system in one body.
Vetroresina Padana - main tank + rinsing + hand washing in one compact body. Low centre of gravity, reduced load on the three-point linkage, improved maneuverability on headlands.
Four capacities to choose from.
ZETA 70 / 100 / 140 / 170 — a diaphragm-piston pump selected according to the capacity and width of the boom. Quiet, resistant to work with liquid fertiliser solutions (RSM).
From manual fittings to ISOBUS.
Standard: Agroplast single heads. Options: 3-position Agroplast/ARAG, constant pressure valves, computers ARAG BRAVO 180/350/400 S, DELTA 70T, ISOBUS IBX100, sensor GPS, boom hydraulics from 15 m.
Working Technique
5 modelsJP 200–650
6–14 mseeding
540 rpmPTO shaft
2 leversadjustment
Boom and Spray liquid
Boom 8–12 m, manually foldable, liquid system with pump UDOR. Economical option for small and medium-sized farms, mounted on the tractor's three-point linkage.
Technology
Key Technologies
Manual flow division per boom
Booms have 3 or 5 sections. The diagram shows a five-section manifold and the principle of circuit selection, without assigning the standard electric control from the cab.
Manual manifold1 / 4
The valve levers are positioned across the manifold, so flow to the boom is cut off.
A single manifold circuit is open, so fluid only reaches one section of the boom.
In the diagram, three of the five circuits are open; In the machine, the choice depends on whether the boom is 3 or 5-sectional.
The liquid flows to all sections of the boom in use, and the level in the tank decreases the fastest.
The drawing is a diagram of the structure and operating principle. The number of valves corresponds to a five-section boom; a three-section boom has three.
Anatomy of a mounted boom sprayer
The four points show the tank, folding boom, arm end protection, and three-point linkage frame.
Tank close to the tractor
The tank is mounted directly in the suspended frame, creating a short and compact machine. Available capacities range from 200 to 1200 l.
200–1200 lcapacity
three-point linkageAggregation
Manually foldable boom package boom
The arms fold mechanically and rest on supports above the frame. For the 8–15 m beams the position adjustment remains manual, while the 18 m beam has hydraulic lifting.
8–18 mwidth
18 mHydraulic lifting
Underrun protection spring
A spring at the end of the folded arm allows the boom tip to deflect upon contact with an obstacle and return to the working position.
spring-loadedsafety
self-returnfunction
three-point linkage frame
Lower pins and an upper hitch point connect the machine to the tractor's rear three-point linkage. The frame simultaneously supports the weight of the tank and the folded boom.
3 pointsTractor connection
MountedMachine type
Tank close to the tractor
The tank is mounted directly in the suspended frame, creating a short and compact machine. Available capacities range from 200 to 1200 l.
Manually foldable boom package boom
The arms fold mechanically and rest on supports above the frame. For the 8–15 m beams the position adjustment remains manual, while the 18 m beam has hydraulic lifting.
Underrun protection spring
A spring at the end of the folded arm allows the boom tip to deflect upon contact with an obstacle and return to the working position.
three-point linkage frame
Lower pins and an upper hitch point connect the machine to the tractor's rear three-point linkage. The frame simultaneously supports the weight of the tank and the folded boom.
Control ARAG
Choose control system
Eight products ARAG: BRAVO (5 variants), Delta 70T (2 variants) and IBX100 (with 3 mounting variants). Recommended: ISOBUS IBX100 — universal.
CANBUS · Standard
BRAVO 180 S
Smaller computer ARAG — Input for spray automation.
- Screen: monochrome + graphics
- Sections: 5 or 7
- Control: rate L/ha, speed, pressure
- Tractor-independent
- The cheapest choice ARAG
5 section7 section
What you get
- Computer BRAVO 180 S (cab)
- Section valve harness (5 or 7)
- Pressure and speed sensors
When: Entry into automation for smaller farms.
CANBUS + Hydraulics
BRAVO 180 S with hydraulics
BRAVO 180 + boom hydraulics control from the cab.
- Screen: monochrome + graphics
- Sections: 5 or 7
- Hydraulics: Boom folding/unfolding from the cab
- Auto: Dosage + sections + boom hydraulics
- Boom: Unfolds without leaving the tractor
5 section7 section
What you get
- Computer BRAVO 180 S + hydraulics module
- Valve harness + Hydraulics
- Boom hydraulic controller
When: Sprayer with hydraulic boom - full control from the cab.
CANBUS · Medium
BRAVO 350
Medium shelf ARAG — colour screen + faster operation.
- Screen: Colour LCD greater than 180
- Sections: 5 or 7
- Automatic sections: with greater precision than 180
- Tractor-independent
- Intermediate shelf
5 section7 section
What you get
- Computer BRAVO 350 (colour LCD)
- Section valve harness (5 or 7)
- Pressure sensors, flow, speed
When: medium-sized farm, more functions than 180.
CANBUS + Hydraulics
BRAVO 350 with hydraulics
BRAVO 350 + full hydraulic boom control.
- Screen: Colorful LCD
- Sections: 7
- Hydraulics: Boom + stabilization from the cab
- Automatic sections + hydraulics
- For larger booms (18–21 m)
7 section
What you get
- Computer BRAVO 350 + module Hydraulics
- Valve Harness + Hydraulic Boom Control
- Hydraulic Controller
When: 7-section sprayers with hydraulic boom for 21 m.
CANBUS · Flagship
BRAVO 400 S with GPS
Flagship CANBUS — 5,7″ TFT, GPS, SD card, anti-overlay.
- Screen: 5,7″ TFT, 65 000 colours
- GPS: integrated, antenna included
- Automatic sections: up to 13 with anti-overlay
- SD card: work reports + tracks
- Tractor-independent
5 section7 section
What you get
- BRAVO 400 S (5,7″ TFT) + antenna GPS
- Section valve harness + sensors
- SD report card
When: The best CANBUS, fully automatic without ISOBUS.
Terminal 7″ + GPS
Delta 70T with GPS
7″ touch terminal ARAG with GPS - without ISOBUS, standalone.
- Screen: 7″ touchscreen ARAG
- GPS: integrated
- Sections: 5 or 7
- Field guidance
- NIE requires ISOBUS in tractor
5 section7 section
What you get
- Delta 70T Terminal 7″ touch
- Antenna GPS
- Valve harness + sensors
When: Modern screen 7″ without ISOBUS in the tractor.
Terminal 7″ + ISOBUS
Delta 70T ISOBUS
7″ touch terminal with full ISOBUS (UT/TC-SC/TC-GEO/NAV).
- Screen: 7″ touchscreen ARAG
- Features VT: UT + TC-SC + TC-GEO + NAV
- Variable Rate Application (VRA)
- Task Controller: ISO-XML, reports
- Full standard ISOBUS 11783
5 section7 section
What you get
- Delta 70T Terminal 7″ touch (ISOBUS UT)
- Harness ISOBUS
- Full integration with the tractor ISOBUS
When: Modern tractor with ISOBUS, reports ISO-XML.
ISOBUS · ECU
ISOBUS IBX100
Unit ECU ARAG — 3 mounting options (with or without Delta).
- Standard: ISO 11783 (universal ISOBUS)
- Valves: for 13 sectional or 128 Seletron
- 3 mounting variants — Variant 1/2/3 (see decision tree)
- Terminal: Delta 70T LUB tractor terminal
- Most popular ISOBUS
5 section7 section
3 mounting options (from PDF training ARAG)
- Variant 1: Tractor MA socket ISOBUS + Delta 70T (ISOBUS-compliant)
- Variant 2: Tractor MA own terminal VT (Delta NIE used)
- Variant 3: Tractor NIE has ISOBUS — Delta 70T stand-alone (NON-ISOBUS)
When: Full control ARAG regardless of the tractor. The decision tree will help you choose the right option.
Mounting option
Which option fits your tractor?
Only for the set IBX100 + Delta 70TAnswer the questions - we'll show you the optimal option.
Question 1 with 2
Does your tractor have a ISOBUS socket (usually at the rear)?
Question 2 from 2
Do you want the Delta 70T to be your main terminal?
Variant 1 · Most common
Delta 70T as the main terminal ISOBUS
The tractor has a socket ISOBUS — you connect through it, but this Delta 70T in-cab is the main operating screen for the mounted sprayer.
📋 Shopping List for Variant 1 (5 section):
| Terminal VT Delta 70T | 4675202 |
| IBX100 ISOBUS control unit | 4679004 |
| Monitor Adapter - UCS (Delta ↔ UCS) | 4679002.208 |
| Power Harness + ISOBUS + Monitor | 4679002.251 |
| Cable UCS Tractor ↔ IBX100 (10 m) | 4679002.501A |
| Sensor harness + main valve + adjustment | 4679000.110 |
| Hydraulic Harness (7 functions) | 4679000.191B |
| Section valve harness (5) | 4679000.195 |
🔧 Cable alternatives UCS: 3m=.503A · 6m=.505A · 14m=.504A · 18m=.500A · 9 hydraulic functions=.192B
Variant 2 · Minimum
Factory tractor terminal (Delta NIE used)
The tractor has its own terminal ISOBUS VT. The sprayer is displayed on the tractor monitor. The smallest kit - without an additional screen in the cab.
📋 Shopping list for Variant 2 (5 section):
| IBX100 ISOBUS control unit | 4679004 |
| Cable UCS Tractor ↔ IBX100 (10 m) | 4679002.501A |
| Sensor harness + main valve + adjustment | 4679000.110 |
| Hydraulic Harness (7 functions) | 4679000.191B |
| Section valve harness (5) | 4679000.195 |
❌ NIE you need: Delta 70T, adapter 4679002.208, harness 4679002.251 - you are using the factory terminal.
⚠️ If the tractor has multiple terminals VT — make sure only one is active.
Variant 3 · Stand-alone
Delta 70T as a stand-alone (no ISOBUS in the tractor)
Your tractor does not have a socket ISOBUS or it doesn't work. The Delta 70T works as a standalone unit — connected directly to the battery and mounted sprayer.
📋 Shopping list for Variant 3 (5 section):
| Terminal VT Delta 70T | 4675202 |
| IBX100 ISOBUS control unit | 4679004 |
| Monitor Adapter - UCS (Delta ↔ UCS) | 4679002.208 |
| Tractor harness NON-ISOBUS (stand-alone) | 4679002.400 |
| Cable UCS Tractor ↔ IBX100 (10 m) | 4679002.501A |
| Sensor harness + main valve + adjustment | 4679000.110 |
| Hydraulic Harness (7 functions) | 4679000.191B |
| Section valve harness (5) | 4679000.195 |
🔄 Difference vs. Variant 1: harness NON-ISOBUS 4679002.400 instead of 4679002.251 — powered by the tractor battery without a socket ISOBUS.
Equipment
Standard and optional sprayer equipment
Category
Kategoria części – Mounted field sprayers with manually foldable boom
Multimedia
Mounted sprayer with manually folded boom
Galeria zdjęć – Mounted field sprayers with manually foldable boom
Model comparison
Technical specifications
| Variant | Machine symbol | Nominal Capacity | Boom | Transport Dimensions (L x W x H) | Working Dimensions (L x W x H) | Sprayer weight | Permissible total weight | Pump | Pump capacity 0 / max MPa | Max. working pressure | Max. capacity | Fill, indicator and scale | Liquid Residue | Diluent / Hand Washing | Agitator, valves and Connections | Filtration | Boom section widths | Nozzle spacing and height | Lifting mechanism | Nozzles / wind | Flooring above ground / step | Tractor requirements | Ground clearance and speeds | Hoses | PTO shaft |
|---|
Comparison
Comparison of selected models
Select two or three models – parameters in one table, without scrolling through the entire offer.
Spray Calculator
Plan Liquid Amount and Treatment Schedule
Planning calculations based on nominal capacity, boom width, application rate, and speed. The range 4–8 km/h applies to 19 variants.
RSM 32 + logistics
A realistic treatment plan, not just travel time
The module uses the variant selected in the calculator above and adds refills and travel to the refueling point.
RSM 32: solution mass = kg N ÷ 0,32; Volume = kg RSM ÷ 1,32 kg/l.
About the Manufacturer
Why JAR-MET?
Contact
Let's talk about sprayer configuration.
Capacity and equipment options - our team will help you choose the perfect model for your farm.
PROSTO Z GOSPODARSTWA