Trailed Field Sprayers with Hydraulic Boom
Tank 1200–2500 l · boom 12–21 m · boom extendable from the cab
Thirteen commercial variants PH: tanks 1200–2500 l, Hydraulically extendable booms 12–21 and pumps UDOR ZETA 100–200. No separate weights and dimensions for PH.
1200–2500 l
boom 12–21 m
UDOR · ARAG
Pump 100–200 dm³/min
For whom
Comfort from the cab
This card shows the confirmed commercial variants PH: capacity, width, pump, and wheels.
Four commercial capacities.
1200, 1600, 2000 and 2500 combined with beams 12–21 m.
ZETA 100, 140, 170 or 200.
The pump is selected based on the configuration.
Unfolding and lifting from the tractor.
Version PH includes hydraulic unfolding and lifting; stabilization and electronics are selected in the configuration.
Working Technique
13variants PH
12–21 mBoom
100–200Pump dm³/min
4Capacity
Boom, fluid, control
Hydraulic boom extension and lifting distinguish the PH family from manual production.
Technology
Key Technologies
Hydraulic Unfolding Sequence
The boom first lowers the supports and lifts above the tank, and only then do the arms extend to the sides. The diagram shows the sequence of movements, not the hydraulic speed.
Boom stage1 / 4
The boom rests on transport supports next to the tank.
The middle section raises the arms above the tank outline.
Only after lifting do the arms extend to the sides.
The beam is unfolded and set to working height.
JOYSTICK
Boom folding
Boom that folds itself
Hydraulic folding to 12–21 working metres and folding for transport – in an "X" above the hopper for 12, 15 and 18 m booms, or along the machine for all widths 12–21 m (both hydraulic modes, optional).
01
"X" mode
Arms up above the tank - narrowest outline during transport. Available for 12, 15, and 18 m booms.
02
Along the tank
Arms horizontally along the machine - low profile, stable transport. Standard for 21 m boom, optional for narrower ones.
Structure of a Trailed Sprayer with a Hydraulic Boom
Click on an item to learn about the boom mechanism, tank, hydraulic system, and chassis of a specific configuration.
Low-mounted tank
The tank is positioned low above the axle to reduce the centre of gravity. The family covers capacities from 1200 to 2500 litres.
1200–2500 lcapacity
13Variant range
Hydraulically folded boom
The arms are hydraulically raised and folded. Depending on the variant, the boom can be positioned along the tank or in an X-shaped arrangement.
12–21 mWorking width
X-shaped / longitudinalfolding system
Hydraulic hoses and fittings
Cables run from the block on the arm to the boom cylinders. The system is responsible for folding, lifting, stabilizing, and locking the working position.
4 functionsboom operation
from the cabcontrol location
Drive axle and tyres
The wheel size is assigned to the capacity: smaller variants use 7,5 × 20, and larger variants use 9,5 × 24 or 9,5 × 32.
7,5 × 20Variant 1200 l
9,5 × 32Variant 2000–2500 l
Low-mounted tank
The tank is positioned low above the axle to reduce the centre of gravity. The family covers capacities from 1200 to 2500 litres.
Hydraulically folded boom
The arms are hydraulically raised and folded. Depending on the variant, the boom can be positioned along the tank or in an X-shaped arrangement.
Hydraulic hoses and fittings
Cables run from the block on the arm to the boom cylinders. The system is responsible for folding, lifting, stabilizing, and locking the working position.
Drive axle and tyres
The wheel size is assigned to the capacity: smaller variants use 7,5 × 20, and larger variants use 9,5 × 24 or 9,5 × 32.
Control ARAG
Choose control system
CANBUS · Standard
BRAVO 180 S
Smaller computer ARAG — Input for spray automation.
- Screen: monochrome + graphics
- Sections: 5 or 7
- Control: rate L/ha, speed, pressure
- Tractor-independent
- The cheapest choice ARAG
5 section7 section
What you get
- Computer BRAVO 180 S (cab)
- Section valve harness (5 or 7)
- Pressure and speed sensors
Characteristics ARAG
- Backlit alphanumeric screen 2×16 characters
- Auto-adjustment of the dose based on flow or pressure
- Auto-stop below minimum pressure - nozzles always within range
- Tank profile calibration via flowmeter
- Export of parameters via USB
- Control to 7 sections + main valve + foam marker
When: Entry into automation for smaller farms.
CANBUS + Hydraulics
BRAVO 180 S with hydraulics
BRAVO 180 + boom hydraulics control from the cab.
- Screen: monochrome + graphics
- Sections: 5 or 7
- Hydraulics: Boom folding/unfolding from the cab
- Auto: Dosage + sections + boom hydraulics
- Boom: Unfolds without leaving the tractor
5 section7 section
What you get
- Computer BRAVO 180 S + hydraulics module
- Valve harness + Hydraulics
- Boom hydraulic controller
Characteristics ARAG
- Screen 2×16 + auto-rate adjustment (flow/pressure)
- Boom hydraulics control from the cab
- Auto-stop below min. pressure
- Displays: dose, speed, pressure, area, time
- To 7 sections + main valve
- Data export USB
When: Sprayer with hydraulic boom - full control from the cab.
CANBUS + Hydraulics
BRAVO 350 with hydraulics
BRAVO 350 + full hydraulic boom control.
- Screen: Colorful LCD
- Sections: 7
- Hydraulics: Boom + stabilization from the cab
- Automatic sections + hydraulics
- For larger booms (18–21 m)
7 section
What you get
- Computer BRAVO 350 + module Hydraulics
- Valve Harness + Hydraulic Boom Control
- Hydraulic Controller
Characteristics ARAG
- Graphical Tank Level Indicator
- Auto-Closing Main Valve and Sections
- Variable Rate (with BRAVO 400S / Delta)
- Port USB — Data Transfer and Update
- Connector GNSS — Treatment Speed and Geo-Registration
- To 7 section
When: 7-section sprayers with hydraulic boom for 21 m.
CANBUS · Flagship
BRAVO 400 S with GPS
Advanced CANBUS — 5,7″ TFT, GPS, SD card, anti-overlay.
- Screen: 5,7″ TFT, 65 000 colours
- GPS: integrated, antenna included
- Automatic sections: up to 13 with anti-overlay
- SD card: work reports + tracks
- Tractor-independent
5 section7 section
What you get
- BRAVO 400 S (5,7″ TFT) + antenna GPS
- Section valve harness + sensors
- SD report card
Characteristics ARAG
- Screen 5,7″ TFT, 65 000 colours
- GNSS — speed, paths and geo-registration
- Anti-overlay — automatic sections (up to 13)
- Variable rate control (maps / VRA)
- SD card - job and track reports
- Independent from the tractor terminal
When: The best CANBUS, fully automatic without ISOBUS.
Terminal 7″ + GPS
Delta 70T with GPS
7″ touch terminal ARAG with GPS - without ISOBUS, standalone.
- Screen: 7″ touchscreen ARAG
- GPS: integrated
- Sections: 5 or 7
- Field guidance
- NIE requires ISOBUS in tractor
5 section7 section
What you get
- Delta 70T Terminal 7″ touch
- Antenna GPS
- Valve harness + sensors
Characteristics ARAG
- Touchscreen terminal 7″ ARAG
- GPS — guidance and automatic sections
- Compatibility with the IBX100 unit (ECU)
- Live display of the field map and parameters
When: Modern screen 7″ without ISOBUS in the tractor.
Terminal 7″ + ISOBUS
Delta 70T ISOBUS
7″ touch terminal with full ISOBUS (UT/TC-SC/TC-GEO/NAV).
- Screen: 7″ touchscreen ARAG
- Features VT: UT + TC-SC + TC-GEO + NAV
- Variable Rate Application (VRA)
- Task Controller: ISO-XML, reports
- Full standard ISOBUS 11783
5 section7 section
What you get
- Delta 70T Terminal 7″ touch (ISOBUS UT)
- Harness ISOBUS
- Full integration with the tractor ISOBUS
Characteristics ARAG
- Terminal 7″ touch — ISOBUS UT
- Operation TC-SC / TC-GEO (sections, variable rate)
- GPS — guidance and paths
- Working through the ISOBUS tractor socket
When: Modern tractor with ISOBUS, reports ISO-XML.
ISOBUS · ECU
ISOBUS IBX100
Controller ECU ARAG in full standard ISOBUS - operated from the Delta 70T or tractor terminal.
- Standard: ISO 11783 (universal ISOBUS)
- Valves: for 13 sectional or 128 Seletron
- Functions: UT, TC-SC (sections), TC-GEO (field maps)
- Terminal: Delta 70T LUB tractor terminal
- Most popular ISOBUS
5 section7 section
System characteristics
- Standard ISO 11783 — compatibility with terminals ISOBUS of various brands
- Task Controller: automatic sections (TC-SC) and variable rate control according to maps (TC-GEO)
- Universal Terminal (UT): operated from the factory screen tractor
- Capacity: for 13 sections or 128 Seletron nozzles
- Compatibility: ARAG Delta 70T terminal or tractor monitor
Mounting: You can select the variant (with Delta 70T or with the tractor terminal) in the wizard further down the page.
Mounting option
Which option fits your tractor?
Only for the set IBX100 + Delta 70TAnswer the questions - we'll show you the optimal option.
Question 1 with 2
Does your tractor have a ISOBUS socket (usually at the rear)?
Question 2 from 2
Do you want the Delta 70T to be your main terminal?
Variant 1 · Most common
Delta 70T as the main terminal ISOBUS
The tractor has a socket ISOBUS — you connect through it, but this Delta 70T in-cab is the main sprayer control screen. The most complete set — full control ARAG for this class.
What you get
- Full sprayer control from the Delta 70T touchscreen terminal in the cab
- Automatic section shutoff and rate maintenance l/ha with GPS
- Controller ISOBUS IBX100 - compatible with ARAG, 5 or 7 section
- Boom hydraulics control (7 or 9 functions) from the terminal
Wiring: cable connecting the tractor to IBX100 in lengths 3 / 6 / 10 / 14 / 18 m (matched to the spacing) plus power supply, sensor, and section valve harnesses - the dealer selects the complete set.
Variant 2 · Minimum
Factory tractor terminal (Delta NIE used)
The tractor has its own terminal ISOBUS VT. The sprayer with a hydraulic boom is displayed on the tractor monitor. The smallest set — without an additional screen in the cab.
What you get
- Sprayer operated from the factory tractor terminal ISOBUS - without an additional screen in the cab.
- Automatic sections and rate l/ha on the tractor monitor.
- The simplest and cheapest set for tractors with ISOBUS VT
Wiring: cable ISOBUS to the tractor socket, and hydraulic and section valve harnesses selected for the boom width.
⚠️ If the tractor has multiple terminals VT - make sure that only one is active (to avoid conflict).
Variant 3 · Stand-alone
Delta 70T as a stand-alone (no ISOBUS in the tractor)
Your tractor does not have a socket ISOBUS or does not work. The Delta 70T operates as a standalone set — connected directly to the battery and the sprayer with a hydraulic boom.
What you get
- Delta 70T as a standalone terminal - works without the ISOBUS socket in the tractor
- Connects directly to the battery and sprayer
- Full control ARAG even on older tractors
Wiring: powered by the battery plus the machine's wiring harness; cable lengths selected for the set.
Equipment
Standard and optional sprayer equipment
Category
Kategoria części – Trailed Field Sprayers with Hydraulic Boom
Multimedia
Trailed sprayer with hydraulic boom
Galeria zdjęć – Trailed Field Sprayers with Hydraulic Boom
Model comparison
Technical specifications
| Model | Index / Variant | Tank capacity | Working width | Pump | Boom | Wheels | Weight | Power | Transport Dimensions |
|---|
Comparison
Comparison of selected models
Select two or three models – parameters in one table, without scrolling through the entire offer.
Spray Calculator
Plan your spraying - calculate fills, time, and consumption
Select your field parameters and sprayer configuration; the calculator will show you how much liquid you need, how many tank refills you need, and the estimated operating time (including travel and refills).
Spray liquid · l/ha
Typical liquid doses (chemical spray):
Results — spray liquid
Liquid requirement
—l
Tank fills
—times
Area / fill
—ha
Spraying time only
—
Estimated total time (with fills and travel)
—
RSM (liquid nitrate) kg/ha
Typical doses RSM 32 (density 1,32 kg/l):
Results — RSM 32
Need RSM (l total)
—l
Tank fills
—times
Area / fill
—ha
Treatment time
—
Estimated total time (with fills and travel)
—
About the Manufacturer
Why JAR-MET?
Contact
Let's talk about sprayer configuration.
Capacity and equipment options - our team will help you choose the perfect model for your farm.
PROSTO Z GOSPODARSTWA