Weeder harrow P510
Widths 1,5–12,0 m · tines Ø7 / Ø8 / Ø9 mm · 6 Rows · Depth up to 50 mm
Weeder harrow P510 for mechanical weed control in the early growth stages.
1,5–12,0 m
Ø7 / Ø8 / Ø9 mm
6 tine rows
Depth up to 50 mm
For whom
Conventional and eco-friendly
Weeder harrow JAR-MET P510 for mechanical care of grassland, field crops, low stubble fields and fields after stubble cultivation. It has 6 rows of spring tines. The 2026 offer includes Ø7, Ø8 or Ø9 mm tines; we provide separate weights for the Ø7 and Ø9 configurations. Working widths are from 1,5 to 12,0 mOptionally available are knife skids, smooth roller and cover crops seeder. You can select the configuration in the main configurator.
Tines Ø7 / Ø8 / Ø9 mm.
Three tooth diameters available in the offer 2026; Separate weights are provided for Ø7 and Ø9 mm.
6 rows of teeth.
Six rows increase the efficiency and uniformity of young weed removal.
Width 1,5–12,0 m.
From compact 1,5 m to wide 12,0 m. Larger models fold for transport.
Architecture
Design and equipment
Detailed product specifications will appear here after the page loads.
Transport position ⇄ working position
Hydraulic folding - select width
See how the P510 weeder transforms from transport to working position - in the variants 4,8 / 6,0 / 9,0 / 12,0 m. Hydraulic folding is activated from the tractor cab.
Photo configurations: The spreaders shown RP300/RP500, clearing bar, and lighting are optional equipment. The photos show sample sets, not the standard equipment of each version P510.
Technology
Key Technologies
From transport position to sowing cover crops
The diagram shows the weeder from the rear, configured with the optional spreader RP500 and a clearing bar. The subsequent steps lead through section unfolding, tine operation, and sowing. The drawing shows the sequence of operations and the set's construction, not the machine's proportions.
- three-point linkage
- joints and actuators
- spring tines
- support wheels
- bar raking
- hopper RP500
- sowing lines
Sections P510 and cover crop sowing in one set
This configuration shows not only the weeder itself, but also the optional RP500, air lines, and levelling bar.
Spring weeding sections
Dense rows of springy tines comb out young weeds and aerate the topsoil. In the P510 family, sections are 1,2 or 1,5 m wide.
1,2 / 1,5 mSection width
Ø7 / Ø8 / Ø9 mmTine variants available
Hydraulic folding joints
Joints on the central frame allow the side sections to be folded for transport. The offer includes hydraulic folding of the four- and six-section variants; the status of the eight-section P510/5 is confirmed in the offer when ordering.
4 / 6sections · hydraulics confirmed
P510/58 sections · status to be confirmed
Pneumatic reservoir RP500
The yellow tank increases the unit's autonomy and allows for the sowing of cover crops during the same pass as the tines are tending the crop.
500 lTank capacity
S121/2Model code
Pneumatic Material Separation
Grey hoses guide the seed from the roller and blower to the seeding points located across the width of the weeder. This prevents the material from being spread from a single central disc.
8seeding channels
1–6 mseeding width range
Levelling Scraper
The black strip running behind the sections smooths the surface after the tines have passed. This is an accessory selected for the conditions, not part of each weeder.
6 mLength in the set shown
1Cultivation and seeding pass
Spring weeding sections
Dense rows of springy tines comb out young weeds and aerate the topsoil. In the P510 family, sections are 1,2 or 1,5 m wide.
Hydraulic folding joints
Joints on the central frame allow the side sections to be folded for transport. The offer includes hydraulic folding of the four- and six-section variants; the status of the eight-section P510/5 is confirmed in the offer when ordering.
Pneumatic reservoir RP500
The yellow tank increases the unit's autonomy and allows for the sowing of cover crops during the same pass as the tines are tending the crop.
Pneumatic Material Separation
Grey hoses guide the seed from the roller and blower to the seeding points located across the width of the weeder. This prevents the material from being spread from a single central disc.
Levelling Scraper
The black strip running behind the sections smooths the surface after the tines have passed. This is an accessory selected for the conditions, not part of each weeder.
Equipment
Standard and optional weeder equipment
Category
Kategoria części – Weeder harrow P510
Multimedia
Weeder harrow P510 — Photos
Galeria zdjęć – Weeder harrow P510
Interactive
Configure the P510 equipment in four widths
Change the variant and then select the machine point. The map shows the equipment depending on the configuration and does not replace the technical anatomy of the product.
Equipment P510
Working sections 1,2/1,5 m
Modular sections allow you to adjust the harrow width to the model P510 and guide the tines stably across the entire working width.
Model comparison
Technical specifications
| Model | Working width (m) | Number of sections | Harrow dimensions: W × D × H transp. (mm) | Dimensions with shaft: W × D × H (mm) | Number of teeth Ø7 / Ø9 (pcs.) | Number of skid knives (pcs.) | Support wheels (pcs.) | Weight Ø7 / Ø9 (kg) | Weight with roller and skid (kg) | Harrow/set power | Capacity at 10 km/h (ha/h) |
|---|
Comparison
Model Comparison - Weeder harrow P510
Select two or three models – parameters in one table, without scrolling through the entire offer.
Productivity Calculator
Efficiency and Runtime - Weeder harrow P510
Select the machine model, operating speed, and field area. The calculator will calculate the estimated efficiency (ha/h) and operating time, taking into account operational efficiency (turns, stops).
About the Manufacturer
Why JAR-MET?
Contact
Let's talk about the configuration - weeder harrow P510.
Choosing the right variant, equipment, and options is best done in a conversation. Start your selection in the main configurator or contact us - we'll help you choose the right configuration for your farm and tractor.
PROSTO Z GOSPODARSTWA