Catalogue/Z241 tedder-rake

Z241 belt tedder-rake

Name: Z241 belt tedder-rake
Brand: JAR-MET

Raking and tedding in one machine · 1.6 / 2.1 m · PTO 540

Z241 combines tedding and raking. The belt-and-tine mechanism moves the crop without soil contact — fewer impurities, an even windrow, repeatable results regardless of sward height.

Media Variants

Two modelsZ241 MINI — 1.6 m tedding, 2.1 m raking. Z241 — 2.1 m / 2.8 m.

MechanismBelt-and-tine: spring tines lift the crop onto the belt without soil contact.

OutputTedding approx. 1.3–1.8 ha/h, raking approx. 1.1–1.4 ha/h.

SpeedsWorking up to 12 km/h, transport up to 25 km/h. Operated by 1 person. PTO 540.

1.6 / 2.1 mPTO 540 rpmup to 12 km/hZ241 MINI / Z241

011.6 / 2.1 mTwo working widths — Z241 MINI and Z241.02up to 12 km/hWorking speed: tedding up to 12 km/h, raking up to 8 km/h.032 modesRaking and tedding — changed without tools using the screen and the wheel angles.04PTO 540Driven by the tractor PTO shaft at 540 rpm.

Who it is for

Cover crop in a single pass

The Z241 tedder-rake replaces two operations with a single pass. The belt-and-tine mechanism moves the crop without soil contact — fewer impurities, repeatable windrows, even feeding into the baler.

Rate

The rate can be matched to the material and the working conditions.

The belt-and-tine mechanism carries the crop on the belt without soil contact — fewer impurities, an even windrow, repeatable results regardless of sward height.

kg/haspeedcalibration

Flow

An electric blower feeds the material to 8 outlets.

Clear hoses, correctly set outlets and a steady forward speed matter more than tank capacity alone.

8 outletsblower1–6 m

Configuration

The RP can work on a companion machine or with a carrier.

The choice of mounting depends on the machine frame, the working height, access to the tank and the intended way of operating it.

mountingNRPGPS / 7-pin

Architecture

Design and equipment

The detailed product specification will appear here once the page has loaded.

Technology

Key technologies

Application

Raking and tedding in a single pass

When to ted and when to rake?

Tedding — right after mowing. The swath is aerated and wilted evenly across the full width: shorter time to harvest and lower leaf losses.

Raking — before the baler or the forage harvester. The crop is laid in an even, repeatable windrow ready for uninterrupted pick-up.

Both operations with one machine and in a single pass — instead of two separate machines. Model selection and settings are shown alongside.

Model selection

Z241 MINI1.6 m tedding / 2.1 m rakingOutput approx. 1.3 ha/h. Lighter model for smaller tractors.Z2412.1 m tedding / 2.8 m rakingOutput approx. 1.8 ha/h. Weight 190–204 kg.ModesRaking and teddingMode changed using the screen and the wheel angles, without tools.

Technical data — Z241 MINI / Z241

Model	Tedding	Raking	Ted. output	Rake output	Weight	PTO	Dimensions
Z241 MINI	1.6 m	2.1 m	approx. 1.3 ha/h	approx. 1.1 ha/h	—	540 rpm	—
Z241	2.1 m	2.8 m	approx. 1.8 ha/h	approx. 1.4 ha/h	190–204 kg	540 rpm	2450×1600×1110 mm

PTO max 540 rpm, nominal torque 400 Nm, power requirement from 22 kW. Working speed up to 12 km/h (tedding), up to 8 km/h (raking). Transport up to 25 km/h. Ground clearance 400 mm, support wheels 400 × 100 mm, screen adjustment 0–900 mm. Telescopic PTO drive shaft min. 560 mm. No prices.

Adjustment

Deflector — range 0–900 mm, shapes the windrow width for the baler
Wheel angles — switching between raking and tedding mode
Working speed — tedding up to 12 km/h, raking up to 8 km/h
Transport clearance — 400 mm, transport up to 25 km/h

What you gain

Clean swath — fewer mineral impurities, higher RFV
One pass — tedding and raking with one machine
Operated by 1 person — simple, light design, PTO 540
Repeatable windrows — regardless of sward height

Z241 models

Z241 MINI and Z241 — choose a variant

Z241 MINI

1.6 m tedding2.1 m raking

Smaller model for light and medium tractors. Output approx. 1.3 ha/h (tedding), approx. 1.1 ha/h (raking). PTO 540 rpm.

Z241

2.1 m tedding2.8 m raking

Larger model — output approx. 1.8 ha/h (tedding). Weight 190–204 kg, dimensions 2450 × 1600 × 1110 mm. PTO 540 rpm.

Equipment

Z241 mechanism, equipment and options

Kategoria części – Z241 Belt Tedder-Rake

Z241 equipment

Belt-and-tine mechanism

The core of the machine as standard — a cross belt with rows of spring tines on a single frame. The entire working section of the Z241 in one proven module, shared by both variants.

spring tinesbeltscreen 0–900 mmPTO 540

Podgląd części – Z241 Belt Tedder-Rake

Media

Z241 — photos and video

Videos of operation and folding

Galeria zdjęć – Z241 Belt Tedder-Rake

Variants

Z241 MINI / Z241 — model comparison

Z241 MINI: 1.6 m tedding. Z241: 2.1 m tedding. Both in one light design.

Model comparison

Technical characteristics

Mechanismbelt-and-tineDrivePTO 540 rpmWorking modestedding / rakingWorking speedup to 12 / 8 km/hTransportup to 25 km/hGround clearance400 mmScreen0–900 mmOperation1 person

Model	Ted./rake width	Output	Weight	Drive	Working speed

Comparison tool

Model comparison — Z241 MINI / Z241

Output calculator

Field output — Z241

Output calculator — Z241

ModelField area (ha)Speed (km/h)Working modeWorking speedField efficiencyResults — material and timeOutput—ha/hWorking time—Working width—mWorking time—Working tipsEnter the area and the rate to see an approximate balance.

About the manufacturer

Why JAR-MET?

Contact

Configuration: Z241

Go to the configurator or send an enquiry to JAR-MET or to a dealer.

Contact Dealer map